GladiatAir HPA tank regulator - 3000PSI


The WarriAir Paintball regulators from GladiatAir are a stylish matte black colour and incorporate a number of features to provide a high level of performance and reliability.

This regulator is pre-set with a standard output within the 700 - 900 PSI range. By removing 2 disc springs, output pressure range can be reduced to 400 - 600 PSI.

The 3000 PSI Reg has a slightly larger gauge than the industry standard, so it is easier to read the pressure.

Regulator is fitted with a filter on the filling adapter to reduce the amount of dirt that gets into the tank, which should prevent problems associated with the regulator not sealing due to particles on the sealing edge and burst discs rupturing.

The 3000 PSI Reg is fitted with a 4.5K PSI Burst Disc.

In accordance with best global practice and AS/NZ Standards burst disc pressure should be equal or below cylinder test pressure. The WarriAir regulators comply with the test pressure requirements.

Body height of regulator is approx. 40mm
Length: 58mm
Weight: 0.137kg

Collections: CO2 & HPA, Tippmann

Category: HPA, reg, Regulator

Related Items